Detailed Product Description
DS203 Serial Device Server
|10/100BaseT Ethernet port||Compact (60x47x30mm)|
|One RS232 port||Wide supply voltage (10-25V)|
The DS203 is a serial device server that can be used to quickly network-enable virtually any serial device or system. Compared to the original DS100 converter, the DS203 is smaller, faster, and has a larger memory.
The DS203 is offered with Tibbo Device Server Toolkit software, which includes Virtual Serial Port Driver for Windows and Linux.
This product can also be supplied (loaded) with TiOS firmware and work as a simple BASIC-programmable controller.
10/100BaseT, auto-MDIX Ethernet port.
One RS232 serial port (TX, RX, RTS, CTS, DTR, DSR).
Two status LEDs on the RJ45 jack.
Two Ethernet status LEDs on top of the device.
Power: 10-24V (12V nominal).
Firmware is upgradeable through the serial port or network.
CE- and FCC- certified.
DMK1000 DIN rail mounting kit
12V/0.5A adaptor: APR-P0011 (US), APR-P0012 (EU), APR-P0013 (UK)
WAS-1499 straight Ethernet cable*
WAS-P0004(B) DB9M-to-DB9F serial cable (device-to-PC)
WAS-P0005(B) DB9F-to-DB9F serial cable (device-to-device)
*For this device can be used as crossover cable too
Full- and half-duplex serial port modes.
Server, client, and server/client network ("routing") modes.
Numerous other options for connections, serial port, etc.
8KB data buffers (one in each direction).
Configuration stored in the EEPROM.
Detailed status indication status indication via LEDs.
Setup through the serial port or network (UDP, Telnet).
Remote control of RTS, CTS, DTR, and DSR lines.
"On-the-fly" commands for immediate serial port configuration.
Serial-side "modem" commands for network connections control.
Direct control of ADSL modems.
Supports UDP, TCP, ARP, ICMP (ping), DHCP, PPPoE, LCP.
BASIC-programmable controller firmware:
See platform documentation.